Plexipaint Mat
    • Plexipaint Mat
    • Plexipaint Mat
    • Plexipaint Mat
    • Plexipaint Mat
    • Plexipaint Mat
    • Delivery 48h Delivery 48h
    • Secure payments Secure payments
    • Technical & commercial support Technical & commercial support

    Plexipaint Mat

    Technical sheet

    Waterborne acrylic onecomponent flat paint, for outdoor walls. Vapour permeable and waterproof. Very appropriate for different porous substrates.
    Also suitable for interior walls where there is ambient humidity, such as in bathrooms, kitchens and laundry rooms.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    0.9 L
    Surface 1 coat: 9.00m²
    2.25 L
    Surface 1 coat: 22.50m²
    4.5 L
    Surface 1 coat: 45.00m²
    9 l
    Surface 1 coat: 90.00m²
    Total quantity selected (L): 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0 m²

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE:

    Waterborne acrylic onecomponent flat paint, for outdoor walls. Vapour permeable and waterproof. Very appropriate for different porous substrates.
    Also suitable for interior walls where there is ambient humidity, such as in bathrooms, kitchens and laundry rooms.

    FEATURES:

    High covering capacity - Easy to apply because of a high percentage of binder - Permeable to vapours - Waterproof - Very good durability.

    SUBSTRATES:

    New and old masonry - Cement - Concrete.

    Systems

    Untreated porous substrates:

    • Primer: 1 coat of impregnation RD-UNIFIX

    • Topcoat: 2 coats of PLEXIPAINT

    Powdering painted substrates:

    • Primer: 1 coat of impregnation RD-UNIFIX

    • Topcoat: 1 or 2 coats of PLEXIPAINT

    Not powdering painted supports:

    Direct application of 1 to 2 coats of PLEXIPAINT on the substrate.

    CONSUMPTION:

    Ca. 10 m²/l per coat

    Application instructions

    APPLICATION CONDITIONS:

    Outdoor: never apply if raining
    Ambient temperature: > 5°C (41°F)
    Relative humity: max. 80 %

    APPLICATION MEANS:

    Brush, roller or airless (nozzle: 013–018)

    PREPARATION OF THE SUBSTRATE:

    The substrate has to be clean, dry, and free of dust.

    New masonries have to be cleaned first with an iron brush to eliminate all spatters of mortar. Painted supports should be cleaned with a high-pression machine. If the substrate is mossy, the moss must be removed with a special anti-moss product.

    DILUTION:

    Product is ready-for-use.

    DRYING TIME (20°C - 68°F):

    Touch dry: +/- 2 hours
    Recoatable: +/- 4 hours

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.

    Technical data

    FINISH:

    Mat

    COLOURS:

    White, bespoke colours.
    Available on RD Coatings dispensing system.

    DENSITY:

    1.45 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight:  60 % +/-2
    In volume: 44 % +/-2

    VISCOSITY:

    60 - 80 P (Brookfield 20 RPM)

    VOC CONTENT:

    < 30 g/l

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Norms et tests

    ISO 16000-6 / VOC Classification in France

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.

    VERS. WE01/230221