Home 
Delivery 48h 
Secure payments 
Technical & commercial support
Calculate here the amount of paint needed for your project
RD-Speedcoat Aqua
Go totechnical sheet
Fast drying Primer/Finish anti-corrosion coating with universal adherence.
Single component fast drying water-based coating for the protection of metal surfaces. RD-Speedcoat Aqua is a DTM (Direct-To-Metal) type of coating that can be applied directly to various kinds of ferrous and non-ferrous metals.
RD-Speedcoat Aqua is UV resistant, and its film forms a neat and tidy industrial enamel type of finish. It’s the ideal type of coating to be used in low to moderate corrosive environments – C1 to C3 according to ISO 12944. As a surface tolerant coating, it can be applied on top of most existing coatings or surfaces!
RD-Speedcoat Aqua is available in bases for RD Coatings’ colour dispenser and can therefore be made in almost any RAL, NCS or bespoke colours.
RD-Speedcoat Aqua is easy to handle, safe and has no fire risks. Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings. It is a fast-drying coating system that greatly reduces downtime during installation and increases productivity.
RD-Speedcoat Aqua is part of the SCS – Single Coating System - product group, meaning that one same product is used as primer and finish without loosing its performances.
Technical sheet RD-Speedcoat Aqua
Download technical sheetDescription of the product
USE
Fast drying Primer/Finish anti-corrosion coating with universal adherence.
FEATURES
Single component fast drying water-based coating for the protection of metal surfaces. RD-Speedcoat Aqua is a DTM (Direct-To-Metal) type of coating that can be applied directly to various kinds of ferrous and non-ferrous metals.
RD-Speedcoat Aqua is UV resistant, and its film forms a neat and tidy industrial enamel type of finish. It’s the ideal type of coating to be used in low to moderate corrosive environments – C1 to C3 according to ISO 12944. As a surface tolerant coating, it can be applied on top of most existing coatings or surfaces!
RD-Speedcoat Aqua is available in bases for RD Coatings colour dispenser and can therefore be made in almost any RAL, NCS or bespoke colours.
RD-Speedcoat Aqua is easy to handle, safe and has no fire risks. Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings. It is a fast-drying coating system that greatly reduces downtime during installation and increases productivity.
RD-Speedcoat Aqua is part of the SCS – Single Coating System - product group, meaning that one same product is used as primer and finish without loosing its performances.
SUBSTRATES
Steel, new and old galvanised steel, stainless steel, aluminium, copper, …
Systems
Moderate industrial environments - C3 High : | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
First Coat | RD-Speedcoat Aqua | 150 / 6 | 65 / 2,6 | 0,15 L / 265 | Coverage depends on the color. |
Top Coat | RD-Speedcoat Aqua | 150 / 6 | 65 / 2,6 | 0,15 L / 265 | |
TOTAL |
| 130 / 5,2 |
| ||
Low corrosion threat - C2 | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
First Coat / Top Coat | RD-Speedcoat Aqua | 200 / 8 | 85 / 3,4 | 0,20 L / 200 | Coverage depends on the color. |
TOTAL |
| 85 / 3,4 |
| ||
Very low corrosion threat - C1 : | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
First Coat / Top Coat | RD-Speedcoat Aqua | 200 / 8 | 85 / 3,4 | 0,20 L / 200 |
|
TOTAL |
| 85 / 3,4 | 0,20 L / 200 | ||
Repainting of already painted elements without traces of corrosion or in good condition | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
First Coat / Top Coat | RD-Speedcoat Aqua | 200 / 8 | 85 / 3,4 | 0,20 L / 200 | Coverage depends on the color. |
Indicated consumption is theoretical and does not consider potential losses during application.
Application instructions
APPLICATION CONDITIONS
Ambient temperature: minimum 10°C (50°F) – optimal between 12 and 25°C (54 and 77°F).
Relative humidity: maximum 80%
Surface temperature must be minimum 3°C (5°F) above dew point.
APPLICATION MEANS
Brush or airless (nozzle size: 010–012)
Application by airless is recommended and makes it easier to reach the recommended thicknesses. Use a device that allows a minimum pressure of 70-150 bar / 1000 - 2000 psi at the outlet.
PREPARATION OF THE SUBSTRATE
The substrate must be clean, dry, degreased and dust free. Non adhering elements such as older coatings or rust must be removed. Different type of surface preparation are possible:
1/ Remove rust manually or by power tool to ST2 – ISO 8501-1 / SSPC SP2 or SP3.
2/ High pressure washing following SSPC SP12 WJ4.
Aluminum: clean with sulfuric acid diluted to 10% or lightly scratch the surface.
New galvanized steel: preferably clean with RD-Eco PowerClean detergent diluted with water or use a conventional detergent.
Stainless steel: preferably clean with RD-Eco PowerClean detergent diluted with water or use a conventional detergent.
Copper: clean with hydrochloric acid diluted to 10% and rinse with water.
Repainting alkyd resin-based paints: Perform an adhesion test beforehand if the paint is recent or less than a year old. Optionally, lightly sand the surface before painting.
DILUTION
Product is ready-for-use.
DRYING TIME (23°C / 73°F, 50% RH)
Touch dry: 30 minutes
Dust free: 45 minutes
Recoatable: 1 hour
CLEANING OF TOOLS
Water.
SPECIFICITIES
Mix well before use.
Technical data
FINISH
Semi-Gloss +/- 70 % +/- 5 (Gardner 60°)
COLOURS
RAL, NCS and customs colors available on RD Coatings dispensing system.
DENSITY
Ca. 1,19 +/- 0,05 g/cm³
SOLIDS CONTENT
In weight: 51 % +/-2
In volume: 43 % +/-2
VISCOSITY
50 P (Brookfield 20RPM)
VOC CONTENT
< 50 g/L
FLASH POINT
Not flammable.
STORAGE STABILITY
Minimum 24 months protected from frost and excessive temperatures in its original closed packaging.
Norms and tests
Salt spray | ISO 12944 / ISO 9227 / ISO 4628 |
Water condensation | ISO 12944 / ISO 9227 / ISO 4628 |
Adhesion | ISO 2409 |
 | ISO 16000-6 / VOC classification in France |
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. S070/240220
Fast drying Primer/Finish anti-corrosion coating with universal adherence.