Home 
Delivery 48h 
Secure payments 
Technical & commercial support
RD-Mur Fleece
Go totechnical sheet
Woven reinforcement fabric for liquid-applied waterproofing and wall coating systems on façades and masonry.
Why use a reinforcing fleece?
The integration of a reinforcing mesh into a liquid waterproofing system significantly enhances its performance. Embedded in the membrane, it creates a homogeneous, continuous, durable, and almost tear-resistant coating.
Main advantages:
- Strengthens the mechanical resistance of the system and reduces the risk of cracking.
- Improves durability against climatic stresses and substrate movements.
- Increases safety on sensitive substrates (roofs, cracked façades, old masonry).
Especially recommended for renovation projects, the reinforcing fleece transforms the liquid coating into a stronger, more flexible, and more reliable system, suitable for the most demanding conditions.
Technical sheet RD-Mur Fleece
Download technical sheetDescription of the product
USE:
Reinforcement mesh used in waterproofing systems for walls and façades.
FEATURES:
RD-Mur Fleece is a 100% polyamide micro-perforated mesh used to reinforce waterproofing systems and ensure the durability of the films, especially on walls and façades with active cracks. It has excellent cracks bridging abilities with good resistance to UV, acids, and alkali.
RD-Mur Fleece is available in different sizes to better fit the needs.
SUBSTRATES:
Concrete, cement, bricks, plaster, coated surfaces, etc.
Systems
Façades and walls with active cracks | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
RD-Mur Fleece | Apply the fleece directly on the surface | ||||
Primer | RD-Elastoflex | 258 / 10,3 | 155 / 6 | 0,40 Kg / 157 | First coat diluted with maximum 10% water |
Finish | RD-Elastoflex | 258 / 10,3 | 155 / 6 | 0,40 Kg / 157 | |
TOTAL | 310 / 12 | 0,80 KG / 75 | |||
Check the product datasheet of RD-Elastoflex for further information.
Indicated consumption is theoretical and does not consider potential losses during application. Itcan also be influenced by the porosity of the substrate.
Application instructions
Unroll and cut the fleece to the desired dimension and lay it on the properly prepared surface. Roll or brush a first layer of RD-Elastoflex through the mesh. Ensure an overlap of 5 cm / 2 inches between each line of fleece.
Technical data
COMPOSITION:
100 % polyamide. “Medium-strong” finish
WEIGHT:
45 - 50 g/m²
DIMENSIONS:
Length: 100 m
Width: 100 cm - 50 cm - 20 cm
THREAD STRENGHT:
44 dtex
STORAGE:
Unlimited.
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. D020/230214
Woven reinforcement fabric for liquid-applied waterproofing and wall coating systems on façades and masonry.